User Tools

Site Tools


rio900ns:diagnostic

Local Diagnostics

This displays the local diagnostic of the RIO that the GUI is connected to. Local Diagnostics

Module This indicates the address and type of modules detected on the IO bus.
Module Status This is a list of current error conditions.
Telemetry Status Indicates if telemetry is enabled or not.
Paired Module If the RIO knows what the module is on the far side it will be indicated here. This requires the far side to have inputs and be transmitting that information. Depending on the configuration this may not happen.
Paired RIO ID If the RIO knows what module it is paired with it will include the ID of the remote RIO it is attached to. This will only occur if the local module has outputs.
Paired Status Indicates the presence of an alarm condition on the associated remote RIO.
IO State The current values of the IO.
Voltage Supply voltage.
Temperature Module temperature.
Relay Indicates the current state of the relay.
RSSI If there is an internal radio this will provide the RSSI from the most recent transmission. This will bounce if the RIO is able to hear multiple transmitters.
Update Update the information on this page.
rio900ns/diagnostic.txt · Last modified: 2022/08/12 10:51 by byee