User Tools

Site Tools


linkrelay

Relay

The Relay section sets up the behavior of the relay.

General

Low VoltageIf the supply voltage remains below the Alarm set point for longer than the delay time the relay will open. If the supply voltage remains above the Alarm Clear set point for longer than the delay time the relay will close.
Local Configuration Error If there is a configuration error on this unit.
Telemetry Error If there is a configuration error between this unit and another unit.
Fail Safe Active If the fail safe timer has expired for any attached module.
Communications TimeoutsIf the unit has not received a message on the specified port within the allotted time.
Remote Alarm If there is a known alarm that does not directly involve this unit.
linkrelay.txt · Last modified: 2019/03/14 10:24 by ahilchie