User Tools

Site Tools


buspower

IO Bus Power

The IO Bus can be put to sleep allowing for power savings in low data applications.

IO Bus Power

Enable IO Bus Sleep If this feature is enabled the RIO will turn the power to the IO bus off. If disabled the IO bus will remain powered. Power will also be maintained to the bus if there is an active GUI connection to the RIO.
Warmup Time This is the time allotted for the modules on the IO bus to reestablish with the RIO. Allowing the RIO to acquire current values for the IO.
On Time This is the time (after the warmup time) the RIO will maintain power to the bus after receiving a wakeup event.
Wake On Data If there is any traffic on the selected port it will trigger a wakeup event.
Wake On Modbus If there is a valid modbus request for the RIO's address (defined in Modbus RTU) on the selected port it will trigger a wakeup event.
buspower.txt · Last modified: 2017/07/24 17:33 by dmeier